Boyle Xtrem
Borosilicate glass tube ø100 and ø133 for extreme or highly corrosive ATEX zone 2, 21 and 22 atmospheres
Fumat
Try the ideal alternative to bulky and expensive ATEX floodlights
Explosive gas environments, zone 2, Dust environments, zones 21 & 22; II 3G Ex ec IIC T4 Gc - II 2D Ex tb IIIC T70°C Db IP66/IP68 markings
LED tubular light ø133 for industrial ATEX environments with high ceilings, zones 2, 21 & 22
Light yet sturdy, the LED FUMAT luminaire is the ideal alternative to bulky and expensive ATEX floodlights. These models come with an 8-year warranty, covering intensive use up to 50°C, and are equipped with a highly dependable, durable LED driver. They are designed to light high spaces in explosive environments.
The Fumat luminaire for high ceilings is designed to withstand extreme ATEX groups, zones 2, 21 & 22.
Chemical and sealing conditions
Corrosive substances, acid vapours
Oils & hydrocarbons
UV radiation and bad weather
Dust and extreme grime
All types of humidity
Washing with a high-pressure jet
Health and safety requirements according to IFS, BRC and HACCP texts
Thermal, mechanical and electrical stresses
Permanent use at temperatures of up to 50°C
Extreme variation in temperature
Repeated turning on and off
Mechanical impacts Intense and repetitive vibrations
Voltage surges up to 4 kV, power surges
Light and sturdy
Forget those heavy cast aluminium ATEX floodlights: Sammode has come up with an original LED alternative offering nothing but benefits: a powerful, efficient and reliable driver in a durably sealed housing, consisting of stainless steel parts and a composite diffuser – robust, ultra-light, corrosion-proof materials. Who could ask for more?
Lighting specifically designed for high ceilings in ATEX zones
Optimised lighting in large storage areas or workshops requires strong luminance and lights designed for intensive use. How do we manage it? High-performance LED modules combined with an elliptical beam linear lens, providing durable, low-energy lighting right where you need it.
Optimal sealing & safety, even with intensive use at 50°C
Forget fine dust, high-pressure jets, corrosive substances and the like. Thanks to its 3-seal system and uniform tightening with a central screw (the Screw© system), the housing remains firmly sealed, even when the temperature varies significantly. IP68, IP69K, everywhere and well into the future!
Reinforced industrial electronics
Even the very best housing cannot stand up to the potential effects of an at-risk network. With this in mind, Sammode has opted for the most reliable components available, designed to withstand electrical disturbance, voltage surges, extensive temperature variation and vibrations.
Easy to install
Sammode has everything covered! Versions with 2 cable glands and connection possible to the removable internal gear tray. Or a pre-cabled version with a pluggable Atex lead, cutting down on site time with no risk of losing parts.
Applications of luminaires by the name Fumat
- Petrochemicals: lighting for high ceilings
- Sawmills: lighting in crushing workshops
- Aeronautical industry: paintwork lighting
- Refinery: general lighting
- Bakery: lighting in flour storage areas
- Brewery: grain silo lighting
- Sugar refinery: storage silo lighting
- Port terminal: coal silo lighting
- Service station lighting
Product shown in situ
Our services
Designed and manufactured in France
Designed and manufactured in France, keeping supply chains short and using durable components and materials, primarily sourced in Europe. Each luminaire is manufactured, assembled and inspected by our teams with full traceability.
8-year warranty, no matter how tough the conditions
Product with Atex certification for gas zones 2 and dust zones 21 & 22, issued by an independent laboratory. 8-year warranty you will not find anywhere else on the market, valid even for 24/7 use at the product’s maximum operating temperature.
100% Removable and repairable on site
Even after 15 or 20 years’ use, every single part we supply can be easily replaced, with no need to send it back to us. No one else offers a guarantee of lifelong lighting solutions!
2 cable glands version
CRI80, 4000K, elliptical beam, ideal for high-ceilinged spaces
|
|
 |
| Ø (mm) | Flux (lm) | L (mm) | Designation | Code | Watt | Data sheet | Plan | STEP DS | .TXT | Download all | 133 | 11100 | 1850 | FUM133 26H840 POME 213 BRS | 19890150 | 75 | Data sheet | Plan | STEP DS | .TXT | Download all |
|---|
1 cable gland version
CRI80, 4000K, elliptical beam, ideal for high-ceilinged spaces
|
|
|
| Ø (mm) | Flux (lm) | L (mm) | Designation | Code | Watt | Data sheet | Plan | STEP DS | .TXT | Download all | 133 | 11100 | 1850 | FUM133 26H840 POME 113 BRS | 19890152 | 75 | Data sheet | Plan | STEP DS | .TXT | Download all |
|---|
Atex disconnectable cable
HO7-RNF pre-wired with a Marechal® PNCX plug. Order separately for this service.
|
|
|
| Cord length (m) | Designation | Code | Data sheet | Plan | STEP DS | .TXT | Download all | 0,1 | CABL HO7RNF-BK ATEX-PLUG 0.1M 3G1.5 | CAB0141 | Data sheet | Plan | STEP DS | .TXT | Download all | 1 | CABL HO7RNF-BK ATEX-PLUG 1M 3G1.5 | CAB0130 | Data sheet | Plan | STEP DS | .TXT | Download all | 3 | CABL HO7RNF-BK ATEX-PLUG 3M 3G1.5 | CAB0143 | Data sheet | Plan | STEP DS | .TXT | Download all |
|---|
×
![]()
Cable entry
1 cable gland
| Polyamide capacity Ø8-13 mm | 113 |
| Polyamide capacity Ø10-15 mm | 116 |
| Nickel-coated brass capacity Ø5-14 mm | 113LN |
2 cable glands including one blind plug
| Polyamide capacity Ø8-13 mm | 213 |
| Polyamide capacity Ø10-15 mm | 216 |
| Nickel-coated brass capacity Ø5-14 mm | 213LN |
Fixing straps
| Reinforced fixing straps | BRS |
| Reinforced fixing straps with HSHC screw | BRV |
Materials
| Polycarbonate housing | PO |
| Coextruded polycarbonate/ PMMA housing with high chemical resistance | POME |
| End caps & fixing straps 304L stainless steel | - |
| End caps & fixing straps 316L stainless steel | MR |
Color temperature
| 3000K | 830 |
| 4000K | 840 |
Lighting management
| Electronic gear unit for DALI 2 dimming | RD |
HO7-RNF pre-wired cable with an IP67/69 Marechal® PNCX Atex disconnectable plug
| Several length available (6m max), 3 or 5 conductors : consult us |
Technical specifications
| Light source |
|
| Optics |
|
| Heat management |
|
| Control gear |
|
| Supply voltage |
|
| Electrical class |
|
| Operating temperature |
|
| Connection |
|
| Mounting |
|
| LED engine maintenance |
|
| Housing |
|
| End caps and fixing straps |
|
| Gaskets |
|
| Method of construction |
|
| ATEX / IECEx |
|
| Marking |
|
| Waterproofness |
|
| Resistance to IK shocks |
|
| Fire resistance |
|
| Vibration resistance |
|
Contact us 
Request a quote 
Product brochure 
