LED high-temperature tubular light ø133 for extreme industrial environments

Two versions of the JOULE X-Heat, specifically designed for high-temperature applications, are available: up to 70°C with 100% built-in electronics and up to 85°C for the version with a remote driver. The LED source is specifically calibrated and protected with a waterproof tubular housing compatible with temperature variations, ensuring considerable energy and maintenance savings for the most extreme industrial processes, where staff hardly dare set foot.

The Joule X-Heat luminaire can withstand the impact of extreme temperatures of up to 85°C.

Chemical and sealing conditions

Corrosive substances, acid vapours

Oils & hydrocarbons

Dust and extreme grime

All types of humidity

Washing with a high-pressure jet

Very hot, humid or dry atmosphere

Thermal, mechanical and electrical stresses

Permanent use at temperatures of up to 85°C

Extreme variation in temperature

Voltage surges up to 4 kV, power surges

Severe impacts

Intense and repetitive vibrations

Tried and tested extra-long life with intensive use at 85°C

Benefit from a sturdy, fully sealed housing thanks to high-temperature silicone seals tightened axially, specifically configured electronics and optimised temperature management. This LED tubular light reflects the full extent of our expertise in extreme environments, offering a reliable, durable option, even when used 24/7 at 85°C.

Built-in or remote electronics, Plug & Play set-up

Compatible with an ambient temperature of up to 70°C, the Joule X-Heat comes with long-lasting LED electronics 100% built into the housing, bringing your energy and maintenance bills down considerably. Sammode has developed a specific model with a remote gear tray for applications between 70°C and 85°C, which keeps the driver away from hot temperatures. When working in extreme conditions, the job needs to be finished pronto, which is why we offer a pluggable connector with a quick locking system for the tubular housing, specifically selected for its ability to withstand high temperatures and mechanical loads.

Ultimate sealing and durability

Forget fine dust, high-pressure jets, corrosive substances and the like. Thanks to its 3-seal system and uniform tightening with a central screw (the Screw© system), the housing remains firmly sealed, even when the temperature varies significantly. IP68, IP69K, everywhere and well into the future!

Impact-proof and compatible with thermal shocks

Thanks to the 100% stainless steel external parts, combined with an ultra-sturdy diffuser, the Sammode housing can withstand IK10 mechanical impacts and corrosive environments to an extent that will surprise you. The locking system (Screw©) protects the luminaire from any risk of thermal shock and eliminates any risk of leaks or lost parts, helping to ensure compliance with IFS, BRC and HACCP requirements for food sites.

Divide your installed power by 3 with zero maintenance!

Unlike fluorescent bulbs, durable LEDs can be relied upon at high temperatures if duly calibrated and integrated. The results of our X-Heat models are spectacular: 100% light output from the second you hit the switch, equivalent to 2 x T8 tubes, while dividing your energy bills by 3!

Applications of luminaires by the name Joule X-Heat

  • Paper mills: lighting in drying areas
  • Steelworks: lighting for the non-stop furnace
  • Glassworks: furnace lighting
  • Enamel works: lighting around firing areas

  • Nuclear facilities: lighting of steam generator pipe protection
  • Thermal power station: boiler lighting

  • Brewery: kiln lighting
  • Industrial fryer: lighting in cooking areas
  • Central kitchen: extractor hood lighting

Product shown in situ

Our services

Designed and manufactured in France

Designed and manufactured in France, keeping supply chains short and using durable components and materials, primarily sourced in Europe. Each luminaire is manufactured, assembled and inspected by our teams with full traceability.

5-year warranty, no matter how tough the conditions

Valid even for 24/7 use at the maximum operating temperature for the product, it reflects our unfailing commitment to our customers!

100% Removable and repairable on site

Even after 15 or 20 years’ use, every single part we supply can be easily replaced, with no need to send it back to us. No one else offers a guarantee of lifelong lighting solutions!

Main references and downloads

Product brochure

Eulumdat (LDT)

Manual

Certificate
Download all

Version compatible with temperatures of up to 70°C with a disconnectable quick-lock plug

CRI80, 4000K. Built-in driver.

Flux (lm)L (mm)DesignationCodeWatt Data sheet Plan STEP DS .TXT Download all
1850 677 JOU133 700 1850-840 POME PS3 SA BRS 32120020 15 Data sheet Plan STEP DS .TXT Download all
2775 987 JOU133 1000 2775-840 POME PS3 SA BRS 32120040 22 Data sheet Plan STEP DS .TXT Download all
3700 1287 JOU133 1300 3700-840 POME PS3 SA BRS 32125055 30 Data sheet Plan STEP DS .TXT Download all
4625 1587 JOU133 1600 4625-840 POME PS3 SA BRS 32120060 37 Data sheet Plan STEP DS .TXT Download all

Version compatible with temperatures of up to 70°C with a cable gland

CRI80, 4000K. Built-in driver.

Flux (lm)L (mm)DesignationCodeWatt Data sheet Plan STEP DS .TXT Download all
1850 677 JOU133 700 1850-840 POME 113 SA BRS 32125018 15 Data sheet Plan STEP DS .TXT Download all
2775 987 JOU133 1000 2775-840 POME 113 SA BRS 32125009 22 Data sheet Plan STEP DS .TXT Download all
3700 1287 JOU133 1300 3700-840 POME 113 SA BRS 32125057 30 Data sheet Plan STEP DS .TXT Download all
4625 1587 JOU133 1600 4625-840 POME 113 SA BRS 32125008 37 Data sheet Plan STEP DS .TXT Download all

Pre-cabling

with high temperature properties cable, with bare free end. Order separately for this service.

Cord length (m)DesignationCode Data sheet Plan STEP DS .TXT Download all
1 CABL FLAM-RED SHIELD 1M 3G1.5 CAB0219 Data sheet Plan STEP DS .TXT Download all
3 CABL FLAM-RED SHIELD 3M 3G1.5 CAB0220 Data sheet Plan STEP DS .TXT Download all
6 CABL FLAM-RED SHIELD 6M 3G1.5 CAB0221 Data sheet Plan STEP DS .TXT Download all

HT version compatible with temperatures of up to 85°C with a disconnectable quick-lock plug

CRI80, 4000K. Driver on a remote gear tray, up to 50 m (supplied).

Flux (lm)L (mm)DesignationCodeWatt Data sheet Plan STEP DS .TXT Download all
1850 677 JOU133 HT 700 1850-840 PO PS3 SA BRS 32125105 16 Data sheet Plan STEP DS .TXT Download all
2775 987 JOU133 HT 1000 2775-840 PO PS3 SA BRS 32125106 23 Data sheet Plan STEP DS .TXT Download all
3700 1287 JOU133 HT 1300 3700-840 PO PS3 SA BRS 32125107 30 Data sheet Plan STEP DS .TXT Download all
4625 1587 JOU133 HT 1600 4625-840 PO PS3 SA BRS 32125108 38 Data sheet Plan STEP DS .TXT Download all

HT version compatible with temperatures of up to 85°C with a cable gland

CRI80, 4000K. Driver on a remote gear tray, up to 50 m (supplied).

Flux (lm)L (mm)DesignationCodeWatt Data sheet Plan STEP DS .TXT Download all
1850 677 JOU133 HT 700 1850-840 PO 113 SA BRS 32125109 16 Data sheet Plan STEP DS .TXT Download all
2775 987 JOU133 HT 1000 2775-840 PO 113 SA BRS 32125110 23 Data sheet Plan STEP DS .TXT Download all
3700 1287 JOU133 HT 1300 3700-840 PO 113 SA BRS 32125111 30 Data sheet Plan STEP DS .TXT Download all
4625 1587 JOU133 HT 1600 4625-840 PO 113 SA BRS 32125112 38 Data sheet Plan STEP DS .TXT Download all

Intermediate cabling

between the tubular luminaire and the remote driver, with high-temperature properties. Order separately for this service.

Cord length (m)DesignationCode Data sheet Plan STEP DS .TXT Download all
1 CABL INTER FLAM-RED SHIELD 1M CAB0216 Data sheet Plan STEP DS .TXT Download all
3 CABL INTER FLAM-RED SHIELD 3M CAB0217 Data sheet Plan STEP DS .TXT Download all
6 CABL INTER FLAM-RED SHIELD 6M CAB0218 Data sheet Plan STEP DS .TXT Download all

Cable entry

1 cable gland

Polyamide capacity Ø5-12mm 113
Polyamide capacity Ø7-14mm 116
Nickel-coated brass capacity Ø5-14 mm 113LN
Stainless steel 316L capacity Ø7-13mm 113INOX

Disconnectable plugs

IP68/69K quick-lock plug with threaded ring (capacity: Ø8 to 10 mm) PS3

Fixing straps

Reinforced fixing straps BRS
Reinforced fixing straps with HSHC screw BRV

Materials

Polycarbonate housing PO
Coextruded polycarbonate/ PMMA housing with high chemical resistance (except HT 85°C version) POME
End caps & fixing straps 304L stainless steel -
End caps & fixing straps 316L stainless steel MR

Color temperature

4000K 840
IP65 housing for remote driver gear tray (HT 85°C version dedicated)
Equipped with 2 polyamide cable glands, ø5-12 mm, polycarbonate, dimensions 275x160x90 mm 17500217
Kits for APSAD compliance
2 x 20 cm  304L stainless steel extensions PU44277
2 x 5 cm  304L stainless steel extensions PU44278

Technical specifications

Light source
  • High efficiency replaceable LED modules for high temperature (IRC>80, 2 SDCM)
  • 50 000 h L80/B50 at max. operating temperature
  • Photobiological hazard : None (RG0)
Optics
  • Special satin-finish housing for LED
Lighting comfort
  • UGR ≤ 25
Heat management
  • 70°C version : Aluminium heat sink
  • HT version 85°C : LED modules on an aluminium base, with advanced heat dissipation properties.
Control gear
  • High reliability constant current output driver, mechanically and thermally reinforced.
  • Resistance to overload: 320 V AC, 48 h
  • Supports voltage spikes < 4 kV
  • Electronic compatible with central source
Supply voltage
  • 198-264V 0/50/60Hz
Electrical class
  • Class I
Operating temperature
  • 70°C version : -20°C to +70°C
  • HT version 85°C : -20°C to +85°C

Connection
  • Plug-in connector for Ø 8 - 10 mm (3 × 1.5 mm²) cable or polyamide cable gland for Ø 5 - 12 mm cable, on a 3 x 2.5 mm² terminal block
  • HT version 85°C : a shielded cable is strongly recommended to avoid any electromagnetic line disturbance
Mounting
  • Attachement with 2 bolt-fitted stainless steel straps with variable center distance and 360° orientation
LED engine maintenance
  • Easily removable LED modules and driver
  • Opening by releasing the 2 closing screws, removing the end cap and extracting the gear tray

Housing
  • 70°C version : Special polycarbonate housing, protected from UV, solvents, hydrocarbons and cleaning agents by a coextrusion of methacrylate
  • HT version 85°C : Polycarbonate able to withstand strong mechanical impacts and high temperatures
End caps and fixing straps
  • 304L stainless steel
Gaskets
  • Silicone
Method of construction
  • Housing in one piece with high mechanical and chemical resistance
  • Long-lasting imperviousness by axial screw fitting

Waterproofness
  • IP66, IP68, IP69K
Resistance to IK shocks
  • IK10
Fire resistance
  • 70°C version : 650°C
  • HT version 85°C : 960°C
Vibration resistance
  • Meets the severe application requirements of standard EN 60598-1 (tested according to IEC 60068-2-6)

You might also be interested in

Cugnot

Cugnot Xtrem

ø100 and ø133 tube light for extreme industrial atmospheres

Rankine

Rankine X-Heat

High temperature ø70 compact tubular light fitting for confined industrial spaces

Leslie

Leslie X-Heat

High temperature borosilicate glass tube ø133 for highly corrosive atmospheres

Pauli-HT200-X-Heat

Pauli HT200 X-Heat

Very high temperature ø133 incandescent tube light

Are you looking for advice or assistance?


Arrange an appointment with one of our experts.