Borosilicate glass LED tubular light ø133 for extreme or highly corrosive ATEX environments, zone 1

Installing safe lighting equipment in an explosive environment is a non-negotiable requirement. On this basis, Sammode designed the SABATIER luminaire, with T5 Gas certification, for intensive use at 50°C. This model can withstand vibrations and chemical attacks in all circumstances thanks to its 5 mm borosilicate glass. The SABATIER is fitted with a cable gland and an ATEX pluggable lead. A wide range of power options are available, providing durable lighting for any zone, no matter how extreme.

The Sabatier Xtrem luminaire can withstand extreme or highly corrosive ATEX environments, zone 1

Chemical and sealing conditions

Highly corrosive or abrasive environments

Splashes of very hot liquids

Flame-resistant, inflammable

Oils & hydrocarbons

Saline atmosphere, sea spray

UV radiation and bad weather

Dust and extreme grime

All types of humidity

Washing with a high-pressure jet

Health and safety requirements according to IFS, BRC and HACCP texts

Thermal, mechanical and electrical stresses

Permanent use at temperatures of up to 50°C

Extreme variation in temperature

Repeated turning on and off

Mechanical impacts Intense and repetitive vibrations

Optimal sealing and safety, even with intensive use at 50°C

Forget hydrocarbons, acid vapours, corrosive substances, sea spray and the like. Thanks to its 3-seal system and uniform tightening with a central screw, the housing remains firmly sealed, even when the temperature varies significantly. IP68, IP69K, everywhere and well into the future!

Unfailing chemical resistance

Benefit from exceptional durability, no matter how tough the conditions, thanks to a corrosion- and abrasion-proof housing, comprising reinforced stainless steel mechanical parts and a borosilicate glass diffuser (IK07) A version with a co-extruded Polycarbonate-PMMA diffuser (IK10) is also available.

Specific LED components with enhanced safety features

Sammode opted to build ATEX-certified LED components, which are safe by design, into its tubular housing, making the fixture easy to install and maintain. The result? This ultra-solid, repairable and upgradable model is far better designed than any other explosion-proof housing on the market.

Resistant to impacts and vibrations

Solid, smooth materials with no mating surfaces, combined with a locking system based on axial tightening (the Screw© system): simple principles for exceptional mechanical strength and a vibration-proof single-piece design, no matter how intense things get.

Easy to install

Sammode has everything covered! Versions with 2 cable glands and connection possible to the removable internal gear tray. Or a pre-cabled version with a pluggable Atex lead, cutting down on site time with no risk of losing parts.

Applications of luminaires by the name Sabatier Xtrem

  • Paper mills: lighting in chemical storage areas
  • Aeronautical industry: lighting in paint booths
  • Cement works: powder silo lighting
  • Steel works

  • Nuclear facilities: lighting in diesel generator rooms
  • Oil platform: general lighting

  • Sugar refinery: lighting in the alcohol transformation area

  • Ship: lighting in the engine room
  • Port terminal: natural gas tank lighting

Product shown in situ

Our services

Designed and manufactured in France

Designed and manufactured in France, keeping supply chains short and using durable components and materials, primarily sourced in Europe. Each luminaire is manufactured, assembled and inspected by our teams with full traceability.

5-year warranty, no matter how tough the conditions

Product with Atex certification for gas zones 1 & 2 and dust zones 21 & 22, issued by an independent laboratory. Our warranty is valid even for 24/7 use at the product’s maximum operating temperature.

100% Removable and repairable on site

Even after 15 or 20 years’ use, every single part we supply can be easily replaced, with no need to send it back to us. No one else offers a guarantee of lifelong lighting solutions!

Main references and downloads

Product brochure

Eulumdat (LDT)

Manual

Certificate
Download all

2 cable glands version

CRI 80, 4000K

Ø (mm)Flux (lm)L (mm)DesignationCodeWatt Data sheet Plan STEP DS .TXT Download all
133 2000 677 SAB133 700 2000-840 PY 213 BRS 19910802 21 Data sheet Plan STEP DS .TXT Download all
133 3100 677 SAB133 700 3100-840 PY 213 BRS 19910806 28 Data sheet Plan STEP DS .TXT Download all
133 4100 1287 SAB133 1300 4100-840 PY 213 BRS 19910818 35 Data sheet Plan STEP DS .TXT Download all
133 6200 1287 SAB133 1300 6200-840 PY 213 BRS 19910895 52 Data sheet Plan STEP DS .TXT Download all
133 5100 1587 SAB133 1600 5100-840 PY 213 BRS 19910833 41 Data sheet Plan STEP DS .TXT Download all
133 7700 1587 SAB133 1600 7700-840 PY 213 BRS 19910837 65 Data sheet Plan STEP DS .TXT Download all

1 cable gland version

CRI 80, 4000K

Ø (mm)Flux (lm)L (mm)DesignationCodeWatt Data sheet Plan STEP DS .TXT Download all
133 2000 677 SAB133 700 2000-840 PY 113 BRS 19910800 21 Data sheet Plan STEP DS .TXT Download all
133 3100 677 SAB133 700 3100-840 PY 113 BRS 19910804 28 Data sheet Plan STEP DS .TXT Download all
133 4100 1287 SAB133 1300 4100-840 PY 113 BRS 19910816 35 Data sheet Plan STEP DS .TXT Download all
133 6200 1287 SAB133 1300 6200-840 PY 113 BRS 19910820 52 Data sheet Plan STEP DS .TXT Download all
133 5100 1587 SAB133 1600 5100-840 PY 113 BRS 19910831 41 Data sheet Plan STEP DS .TXT Download all
133 7700 1587 SAB133 1600 7700-840 PY 113 BRS 19910835 65 Data sheet Plan STEP DS .TXT Download all

Atex disconnectable cable

HO7-RNF pre-wired with a Marechal® PNCX plug. Order separately for this service.

Cord length (m)DesignationCode Data sheet Plan STEP DS .TXT Download all
0,1 CABL HO7RNF-BK ATEX-PLUG 0.1M 3G1.5 CAB0141 Data sheet Plan STEP DS .TXT Download all
1 CABL HO7RNF-BK ATEX-PLUG 1M 3G1.5 CAB0130 Data sheet Plan STEP DS .TXT Download all
3 CABL HO7RNF-BK ATEX-PLUG 3M 3G1.5 CAB0143 Data sheet Plan STEP DS .TXT Download all

Cable entry

1 cable gland

Polyamide capacity Ø8-13 mm 113
Polyamide capacity Ø10-15 mm 116
Nickel-coated brass capacity Ø5-14 mm 113LN

2 cable glands including one blind plug

Polyamide capacity Ø8-13 mm 213
Polyamide capacity Ø10-15 mm 216
Nickel-coated brass capacity Ø5-14 mm 213LN

Fixing straps

Reinforced fixing straps BRS
Reinforced fixing straps with HSHC screw BRV

Materials

Borosilicate glass housing (IK07) PY
Coextruded polycarbonate/ PMMA housing IK10 POME
End caps & fixing straps 304L stainless steel -
End caps & fixing straps 316L stainless steel MR

Color temperature

4000K 840
304L stainless steel extension strap for offset fastening (up to 30 cm away)
1 fixing strap ø133 CP00949
Folded 304L stainless steel protective cover
Length 800mm PU6362
Length 1400mm PU6286
Length 1700mm PU6363
304L stainless steel column mounting fixing strap
Adapter ø1"1/4 (=42mm) PU4321
Adapter ø1"1/2 (=49mm) PU4083
Adapter ø2" (=60mm) PU4082

Technical specifications

Light source
  • High-efficiency removable LED module (CRI>80, 3 SDCM)
  • 50 000 h L80/B10 at max. operating temperature
Optics
  • Specific satin-finish primary diffuser optics
Heat management
  • Aluminium heat sink
Control gear
  • High reliability constant current output driver, mechanically and thermally reinforced.
  • Electronic compatible with central source
  • Compatible with neutral TN, TT and IT arrangements with no limitations
Supply voltage
  • 198-264V 0/50/60Hz
Electrical class
  • Class I
  • Stud welded to the input end cap for any bonding connections
Operating temperature
  • -20°C to +50°C

Connection
  • With ATEX polyamide cable gland for Ø8 to 13 mm cable
  • 1 cable gland version : to a 3 x 2,5 mm² terminal block
  • 2 cable glands version : to 5x2,5mm² double deck terminal block
Mounting
  • Attachement with 2 bolt-fitted stainless steel straps with variable center distance and 360° orientation
LED engine maintenance
  • Easily removable LED modules and driver
  • Off-load opening in an explosive environment

Housing
  • Borosilicate-glass
End caps and fixing straps
  • 304L stainless steel
Gaskets
  • Peroxide-cured EPDM
Method of construction
  • Housing in one piece with high mechanical and chemical resistance
  • Long-lasting imperviousness by axial screw fitting

ATEX / IECEx
  • IEC 60079-0, IEC 60079-7, IEC 60079-18, IEC 60079-31
Marking
  • II 2G Ex eb mb IIC T5 Gb - II 2D Ex tb IIIC T80°C Db IP66
Temperature class 
  • T5 (Gaz)
Waterproofness
  • IP66, IP68, IP69K
Resistance to IK shocks
  • IK07
Fire resistance
  • Non-flammable
Vibration resistance
  • Meets the severe application requirements of standard EN 60598-1 (tested according to IEC 60068-2-6)

You might also be interested in

Alder

Alder

Tube ø133 for industrial ATEX zone 1 atmospheres

Boyle

Boyle Xtrem

Borosilicate glass tube ø100 and ø133 for extreme or highly corrosive ATEX zone 2, 21 and 22 atmospheres

Fumat

Fumat

Tube ø133 for high-ceilinged ATEX zone 2,21,22 atmospheres

Jamin

Jamin

Tube ø100 and 133 for industrial ATEX zone 2, 21, 22 atmospheres

Are you looking for advice or assistance?


Arrange an appointment with one of our experts.